Hager JK11003S 100A 3 Phase Mains Isolator Incomer Kit

Product Description

Hager JK11003S
Invicta 3 100A 3 Pole Incomer Switch Kit

Includes:
A. 1 x Terminal Shield
B. 1 x SBN390 100A 3 Pole Modular Switch / Isolator and DIN Rail
C. 4 x Incomer links
D. 3 x M5 Carp Nuts
E. 1 x Caged Terminal and M6 Carp Nut

Hager JK 3 pole Invicta Incomer Kit

Installation Instructions
Locate the income switch (A) onto the left side of the Din rail (B), and fit the L1, L2 and L3 incomer links. Ensure that the links' teeth are within the top terminal of the incomer switch.

Ensure that the caged neutral link (C) is secured to the neutral cross link using the M6 carp nut and tightened to 5Nm. use the M5 carp nuts for the phase connections are tightened to 5Nm. Ensure that all terminal connections on incomer switch (D) connections are tightened to 3.5Nm. Ensure the connections on the busbar links (E) are to 5Nm (3 x Phase and Neutral).

Incomer Installation Instructions 2

After terminating incoming cables fix the main incomer shroud (F) to the clip in fixing points (G).

Incomer Installation Instructions 3

Suitable for use with all Hager Invicta 3 Phase 125A Distribution Boards

Specifications

Brand

Hager

Product Code

HAG JK11003S

Description

Hager JK11003S
Invicta 3 100A 3 Pole Incomer Switch Kit

Includes:
A. 1 x Terminal Shield
B. 1 x SBN390 100A 3 Pole Modular Switch / Isolator and DIN Rail
C. 4 x Incomer links
D. 3 x M5 Carp Nuts
E. 1 x Caged Terminal and M6 Carp Nut

Hager JK 3 pole Invicta Incomer Kit

Installation Instructions
Locate the income switch (A) onto the left side of the Din rail (B), and fit the L1, L2 and L3 incomer links. Ensure that the links' teeth are within the top terminal of the incomer switch.

Ensure that the caged neutral link (C) is secured to the neutral cross link using the M6 carp nut and tightened to 5Nm. use the M5 carp nuts for the phase connections are tightened to 5Nm. Ensure that all terminal connections on incomer switch (D) connections are tightened to 3.5Nm. Ensure the connections on the busbar links (E) are to 5Nm (3 x Phase and Neutral).

Incomer Installation Instructions 2

After terminating incoming cables fix the main incomer shroud (F) to the clip in fixing points (G).

Incomer Installation Instructions 3

Suitable for use with all Hager Invicta 3 Phase 125A Distribution Boards

Reviews

No reviews left yet

Write A Review

Attributes

Brand

Hager

Product Code

HAG JK11003S

Delivery & Returns

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed feugiat sem id nunc finibus, et facilisis dolor aliquam. Donec ex felis, scelerisque ut facilisis et, convallis nec magna. Nulla vel ex eget lacus imperdiet mattis convallis quis leo. Mauris laoreet vulputate mauris. Vestibulum in blandit enim. Vivamus consectetur mattis dapibus. Nullam ultricies malesuada dignissim.