Free Next Day Delivery
On Thousands of Stock Lines

Big Brands & Low Prices
Order with confidence today

Excellent Reviews on Trustpilot
Read reviews from our customers

Need Help?
Speak to an expert today

Home / Products by Brand / Hager / Hager Consumer Units / Hager Flush Mounted Consumer Units

Hager VMLF120 Flush 20 Way Consumer Unit with 100a Main Switch

Product Description

Specification
Amendment 3 metal consumer unit
Number of Ways: 20 Way
Supplied with: 100A Main Switch
Hager code: VMLF120

Dimensions
Width: 478mm
Height: 282mm
Depth: 72mm
Profile: 32mm with cover

Part of Hager's 'Design 10' range the VMLF120 provides discrete domestic circuit protection. It is designed to be recessed into the cavity wall so that only the front cover is visible, protruding just 32mm.

Supplied with 100a Mains switch and offering 20 usable ways it may be populated with 1 x RCD and 18 x MCBs or a full bank of 20 x RCBOs for total circuit isolation and 17th Edition compliance.

Inside a Flush Consumer Unit

1. Cable Clamps: Cable clamps come as standard on our flush fit boards to help with securing the tails in place inside the board.

2. Adjustable Depth: To allow for a range of installation depths within a wall, the frame is adjustable. There are flanges on the frame which sit on the finished surface of the wall, helping to ensure that the devices always protrude through the front cover a uniform amount, helping to maintain the IP rating of the board.

3. Knockouts: on the top, bottom, sides and rear of the back box allowing multiple cable entry options. Raised sides on the box give a reference for plasterboarding. Oval knockouts can be protected with 38mm open grommet.

4. Installation Depth: The full metal DIN rail comes with extra support to allow the frame to be adjustable for depth. This allows the board to be installed at a range of depths into the wall. The minimum depth is 72mm allowing for 60mm of studwork and 12mm of plasterboard.

5. Removable Frame: The frame contains all of the devices, neutral and earth terminations and the cable clamp. This can be removed whilst the building work is completed and quickly re-installed into the back-box later. It is then secured with the use of the 4 wing nuts removing the need for any special tools.